Pipes and tubing: What you need to know

Nagging leaks and new sink installations — whatever your DIY plumbing project will be, you're going to be dealing with pipes and tubing. Understanding the types of pipes and tubing available can help you form a big-picture approach to your DIY plumbing projects.

From leaks to new sink installations, pipes and tubing are plumbing essentials you’re going to be dealing with. Understanding the different types of pipes and tubing available can help you form a big-picture approach to your DIY plumbing projects.

Plumbing systems use pipes to carry water, waste and natural gas in and out of your home. Various pipes serve various purposes:

• Water supply lines carry water from a main pipe or well to faucets and fixtures in your home.
• Drain-waste-vent (DWV) lines remove waste and gases from your home and empty them in to a sewer or septic tank.
• Gas supply lines carry gas to household appliances.
• Most DIY jobs you take on will involve water pipes, the safest and easiest to repair or install yourself.

Important!

Never attempt a gas-line plumbing repair, or install one on your own. It involves highly flammable, potentially deadly gases and should only be carried out by a professional.

Pipes and tubing may look similar but they’re rarely interchangeable. They differ in use and measurement. DIY plumbing projects require pipe. A few facts:

• Pipes are pressure rated and used to transport fluids and gases. Because they move something, the inside diameter is most important. Size is determined by an inside (nominal) diameter and schedule (wall thickness).
• Tubes are used in structural applications, therefore outer measurement and strength are important. Size is determined by outside diameter and wall thickness.
• Tubes have stricter tolerances and are often more expensive.

Good to know!

For repair jobs, it’s handy to measure the old pipe or bring it to the store as a reference for buying the new one.

Pipes are made of either metal or plastic. Always check local code requirements to ensure the materials you select meet current standards. Common materials used for water supply and DWV lines include:

PVC (poly-vinyl-chloride) 

• The most common type of plastic, PVC pipe is rigid and comes in a variety of pressure ratings.
• Used for cold-water applications and drainage lines.
• Inexpensive and easy to install.

CPVC (Chlorinated Polyvinyl Chloride)

• Similar to PVC, but more ductile and better suited to higher temperatures.
• Primarily used for residential hot- and cold-water applications.
• Often used to replace copper pipe, as it’s less expensive and much easier to install.

PEX

• Durable, flexible hose or tubing that’s cost effective and easy to install. Requires minimal maintenance.
• Great for interior residential hot- and cold-water applications and with hydronic heating.
• Resists heat better than most plastics. Resistant to bursting even if it freezes.
• Can’t be used outdoors as it degrades under UV light.

Copper

• Traditional and reliable material, but more expensive than other types. Often replaced with more affordable plastic options.
• Used with hot- and cold-water applications, usually in residential water supply lines and as a refrigerant line in HVAC.
•  Available in soft form (usually for refrigerant lines) and rigid form for water pipelines.
• Can freeze and snap in extreme cold.

Cast Iron

• Strong and durable but heavy and difficult to work with.
• Used for drainage lines.
• Repairs are often made with plastic PVC piping, which joins easily to cast iron.

ABS

• Strong, corrosion-resistant and easy to install.
• Used for drainage lines.
• Less expensive than metal piping, but with a superior flow.
• Doesn’t hold up well to UV radiation and may be limited by outdoor plumbing code restrictions.

 Good to know!

Older homes often used lead water pipes. Pipes, pipe-fittings and valves containing lead in excess of 0.25 percent (with respect to wetted or contact surface) are no longer permitted for use in potable water systems.

When repairing or replacing pipes, consider:

• What type of application do you need it for? Water lines? Drainage?
• What material is best suited for your application? Does it meet local code guidelines?
• Do you know the correct measurements?
• Do you need pipe fittings and if so, what kind?
• Do you need any solvent cements or soldering tools?

Understanding what pipes or tubes are needed and ensuring you have the right material for the job will help your plumbing projects run smoothly. With a little more knowledge about plumbing pipes and tubes under your tool belt, you’re well on your way to taking on that leaky fixture or DIY sink installation with confidence.